Anti Static Mat for Pc ESD Mat: 24"X48" Soldering Table Mat Kit Computer Electronics Repair- Heat Resistant Static Mat（Blue

Anti Static Mat for Pc ESD Mat: 24″X48″ Soldering Table Mat Kit Computer Electronics Repair- Heat Resistant Static Mat（Blue

$49.99

About this item

  • Effective ESD Protection: This is a professional-grade ESD Anti-Static Mat, Surface resistivity of 10^6 – 10^8 ohms & Volume resistivity of 10^5 – 10^8 ohms
  • Multi-layer composite structure: The blue used to be the dissipative layer, which stores and absorbs static electricity around the table, and the black layer is the conductive layer, which quickly discharges the absorbed static electricity
  • Heat Resistant 180°F: Operating temperature (-30℉ to 180℉). The grounding mat greatly protects your workbench with high temperature-resistant features
  • Large Size: Antistatic mat (24 x 48 x 0.08 inches) provides bigger space. It’s great for professional repair store, DIY handyman and electronics workshop
  • Versatile and Practical: ESD mat grounding kit can satisfy many projects like for repairing pc, pads, electronic circuit boards, and cellphones
Category:

Product description

Anti Static Mat

How to install an workstation:

1. Lay the table mat flat on the workbench.

2. Connect the common point ground cord to the table mat by snapping it to the left or right snap.

3. Connect the wrist strap to the common point ground cord by plugging the banana plug into one of the ground cord’s banana jacks.

4. Snap the wrist band to the coil cord. Tip: Make sure that the operator wears the wrist band on bare skin.

5. Connect the common point ground cord to ground. Connection to this ground point most easily accomplished by removing the center AC outlet plate cover screw, placing the screw through the eyelets from both ground cords, and replacing the screw. The wires can be moved to the left and right sides of the screw so that they do not obstruct the outlet.

Anti Static MatTable Mat KitAnti Static mat

The Anti Static bracelet has a built-in 1 MΩ resistor.

The working principle of removing static electricity: Static electricity needs to be removed with a link wire with a resistance value of 1 MΩ to 1000 MΩ.

Therefore, the measured resistance value of the wrist strap should be between in order to effectively eliminate the static electricity of the human body. Note: A wire that is directly connected cannot remove static electricity.

Related products